Hey people are you looking for the steps to download the VIDEO or AUDIO(mp3) from Youtube.
As there are n no. of method but i will like to describe two of most instant one.Here is the method:-
1) Download it online by Vixy.net
2) If you are using Mozilla Firefox Browser ,Click on the on the Tool>add on>get add on.
Then there search Easy You tube video down loader ,install it and you are ready to go, Now
next time you watch any video,audio on youtube all you just have to do is just click on a micro
tab in a shape of media type in the status bar of browser.Thatch it Ye pee...
Tuesday, September 15, 2009
Thursday, August 27, 2009
How to Bypass the BIOS password
The BIOS passwords can add an extra layer of security for desktop and laptop computers. They are used to either prevent a user from changing the BIOS settings or to prevent the PC from booting without a password. Unfortunately, BIOS passwords can also be a liability if a user forgets their password, or changes the password to intentionally lock out the corporate IT department. Sending the unit back to the manufacturer to have the BIOS reset can be expensive and is usually not covered in the warranty. Never fear, all is not lost. There are a few known backdoors and other tricks of the trade that can be used to bypass or reset the BIOS.
Before attempting to bypass the BIOS password on a computer, please take a minute to contact the hardware manufacturer support staff directly and ask for their recommended methods of bypassing the BIOS security. In the event the manufacturer cannot (or will not) help you, there are a number of methods that can be used to bypass or reset the BIOS password yourself. They include:
Using a manufacturers backdoor password to access the BIOS
Use password cracking software
Reset the CMOS using the jumpers or solder beads.
Removing the CMOS battery for at least 10 minutes
Overloading the keyboard buffer
Using a professional service
Please remember that most BIOS passwords do not protect the hard drive, so if you need to recover the data, simply remove the hard drive and install it in an identical system, or configure it as a slave drive in an existing system. The exception to this are laptops, especially IBM Thinkpads, which silently lock the hard drive if the supervisor password is enabled. If the supervisor password is reset without resetting the and hard drive as well, you will be unable to access the data on the drive.
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Backdoor passwords
Many BIOS manufacturers have provided backdoor passwords that can be used to access the BIOS setup in the event you have lost your password. These passwords are case sensitive, so you may wish to try a variety of combinations. Keep in mind that the key associated to "_" in the US keyboard corresponds to "?" in some European keyboards. Laptops typically have better BIOS security than desktop systems, and we are not aware of any backdoor passwords that will work with name brand laptops.
WARNING: Some BIOS configurations will lock you out of the system completely if you type in an incorrect password more than 3 times. Read your manufacturers documentation for the BIOS setting before you begin typing in passwords
Award BIOS backdoor passwords:
ALFAROME ALLy aLLy aLLY ALLY aPAf _award AWARD_SW AWARD?SW AWARD SW AWARD PW AWKWARD awkward BIOSTAR CONCAT CONDO Condo d8on djonet HLT J64 J256 J262 j332 j322 KDD Lkwpeter LKWPETER PINT pint SER SKY_FOX SYXZ syxz shift + syxz TTPTHA ZAAADA ZBAAACA ZJAAADC 01322222
589589 589721 595595 598598
AMI BIOS backdoor passwords:
AMI AAAMMMIII BIOS PASSWORD HEWITT RAND AMI?SW AMI_SW LKWPETER A.M.I. CONDO
PHOENIX BIOS backdoor passwords:
phoenix, PHOENIX, CMOS, BIOS
MISC. COMMON PASSWORDS
ALFAROME BIOSTAR biostar biosstar CMOS cmos LKWPETER lkwpeter setup SETUP Syxz Wodj
OTHER BIOS PASSWORDS BY MANUFACTURER
Manufacturer Password
VOBIS & IBM merlin
Dell Dell
Biostar Biostar
Compaq Compaq
Enox xo11nE
Epox central
Freetech Posterie
IWill iwill
Jetway spooml
Packard Bell bell9
QDI QDI
Siemens SKY_FOX
TMC BIGO
Toshiba Toshiba
TOSHIBA BIOS
Most Toshiba laptops and some desktop systems will bypass the BIOS password if the left shift key is held down during boot
IBM APTIVA BIOS
Press both mouse buttons repeatedly during the boot
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Password cracking software
The following software can be used to either Cr*ck or reset the BIOS on many chipsets. If your PC is locked with a BIOS administrator password that will not allow access to the floppy drive, these utilities may not work. Also, since these utilities do not come from the manufacturer, use them cautiously and at your own risk.
Cmos password recovery tools 3.1
!BIOS (get the how-to article)
RemPass
KILLCMOS
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Using the Motherboard "Clear CMOS" Jumper or Dipswitch settings
Many motherboards feature a set of jumpers or dipswitches that will clear the CMOS and wipe all of the custom settings including BIOS passwords. The locations of these jumpers / dipswitches will vary depending on the motherboard manufacturer and ideally you should always refer to the motherboard or computer manufacturers documentation. If the documentation is unavailable, the jumpers/dipswitches can sometimes be found along the edge of the motherboard, next to the CMOS battery, or near the processor. Some manufacturers may label the jumper / dipswitch CLEAR - CLEAR CMOS - CLR - CLRPWD - PASSWD - PASSWORD - PWD. On laptop computers, the dipswitches are usually found under the keyboard or within a compartment at the bottom of the laptop.
Please remember to unplug your PC and use a grounding strip before reaching into your PC and touching the motherboard. Once you locate and rest the jumper switches, turn the computer on and check if the password has been cleared. If it has, turn the computer off and return the jumpers or dipswitches to its original position.
The CMOS settings on most systems are buffered by a small battery that is attached to the motherboard. (It looks like a small watch battery). If you unplug the PC and remove the battery for 10-15 minutes, the CMOS may reset itself and the password should be blank. (Along with any other machine specific settings, so be sure you are familiar with manually reconfiguring the BIOS settings before you do this.) Some manufacturers backup the power to the CMOS chipset by using a capacitor, so if your first attempt fails, leave the battery out (with the system unplugged) for at least 24 hours. Some batteries are actually soldered onto the motherboard making this task more difficult. Unsoldering the battery incorrectly may damage your motherboard and other components, so please don't attempt this if you are inexperienced. Another option may be to remove the CMOS chip from the motherboard for a period of time.
Note: Removing the battery to reset the CMOS will not work for all PC's, and almost all of the newer laptops store their BIOS passwords in a manner which does not require continuous power, so removing the CMOS battery may not work at all. IBM Thinkpad laptops lock the hard drive as well as the BIOS when the supervisor password is set. If you reset the BIOS password, but cannot reset the hard drive password, you may not be able to access the drive and it will remain locked, even if you place it in a new laptop. IBM Thinkpads have special jumper switches on the motherboard, and these should be used to reset the system.
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Overloading the KeyBoard Buffer
On some older computer systems, you can force the CMOS to enter its setup screen on boot by overloading the keyboard buffer. This can be done by booting with the keyboard or mouse unattached to the systems, or on some systems by hitting the ESC key over 100 times in rapid succession.
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Jumping the Solder Beads on the CMOS
It is also possible to reset the CMOS by connecting or "jumping" specific solder beads on the chipset. There are too many chipsets to do a breakdown of which points to jump on individual chipsets, and the location of these solder beads can vary by manufacturer, so please check your computer and motherboard documentation for details. This technique is not recommended for the inexperienced and should be only be used as a "last ditch" effort.
||:- DISCLAIMER -:||
This article is intended only for IT Professionals and systems administrators with experience servicing computer hardware. It is not intended for home users, hackers, or computer thieves attempting to Cr*ck the password on a stolen PC. Please do not attempt any of these procedures if you are unfamiliar with computer hardware, and please use this information responsibly. LabMice.net is not responsible for the use or misuse of this material, including loss of data, damage to hardware, or personal injury.
Before attempting to bypass the BIOS password on a computer, please take a minute to contact the hardware manufacturer support staff directly and ask for their recommended methods of bypassing the BIOS security. In the event the manufacturer cannot (or will not) help you, there are a number of methods that can be used to bypass or reset the BIOS password yourself. They include:
Using a manufacturers backdoor password to access the BIOS
Use password cracking software
Reset the CMOS using the jumpers or solder beads.
Removing the CMOS battery for at least 10 minutes
Overloading the keyboard buffer
Using a professional service
Please remember that most BIOS passwords do not protect the hard drive, so if you need to recover the data, simply remove the hard drive and install it in an identical system, or configure it as a slave drive in an existing system. The exception to this are laptops, especially IBM Thinkpads, which silently lock the hard drive if the supervisor password is enabled. If the supervisor password is reset without resetting the and hard drive as well, you will be unable to access the data on the drive.
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Backdoor passwords
Many BIOS manufacturers have provided backdoor passwords that can be used to access the BIOS setup in the event you have lost your password. These passwords are case sensitive, so you may wish to try a variety of combinations. Keep in mind that the key associated to "_" in the US keyboard corresponds to "?" in some European keyboards. Laptops typically have better BIOS security than desktop systems, and we are not aware of any backdoor passwords that will work with name brand laptops.
WARNING: Some BIOS configurations will lock you out of the system completely if you type in an incorrect password more than 3 times. Read your manufacturers documentation for the BIOS setting before you begin typing in passwords
Award BIOS backdoor passwords:
ALFAROME ALLy aLLy aLLY ALLY aPAf _award AWARD_SW AWARD?SW AWARD SW AWARD PW AWKWARD awkward BIOSTAR CONCAT CONDO Condo d8on djonet HLT J64 J256 J262 j332 j322 KDD Lkwpeter LKWPETER PINT pint SER SKY_FOX SYXZ syxz shift + syxz TTPTHA ZAAADA ZBAAACA ZJAAADC 01322222
589589 589721 595595 598598
AMI BIOS backdoor passwords:
AMI AAAMMMIII BIOS PASSWORD HEWITT RAND AMI?SW AMI_SW LKWPETER A.M.I. CONDO
PHOENIX BIOS backdoor passwords:
phoenix, PHOENIX, CMOS, BIOS
MISC. COMMON PASSWORDS
ALFAROME BIOSTAR biostar biosstar CMOS cmos LKWPETER lkwpeter setup SETUP Syxz Wodj
OTHER BIOS PASSWORDS BY MANUFACTURER
Manufacturer Password
VOBIS & IBM merlin
Dell Dell
Biostar Biostar
Compaq Compaq
Enox xo11nE
Epox central
Freetech Posterie
IWill iwill
Jetway spooml
Packard Bell bell9
QDI QDI
Siemens SKY_FOX
TMC BIGO
Toshiba Toshiba
TOSHIBA BIOS
Most Toshiba laptops and some desktop systems will bypass the BIOS password if the left shift key is held down during boot
IBM APTIVA BIOS
Press both mouse buttons repeatedly during the boot
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Password cracking software
The following software can be used to either Cr*ck or reset the BIOS on many chipsets. If your PC is locked with a BIOS administrator password that will not allow access to the floppy drive, these utilities may not work. Also, since these utilities do not come from the manufacturer, use them cautiously and at your own risk.
Cmos password recovery tools 3.1
!BIOS (get the how-to article)
RemPass
KILLCMOS
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Using the Motherboard "Clear CMOS" Jumper or Dipswitch settings
Many motherboards feature a set of jumpers or dipswitches that will clear the CMOS and wipe all of the custom settings including BIOS passwords. The locations of these jumpers / dipswitches will vary depending on the motherboard manufacturer and ideally you should always refer to the motherboard or computer manufacturers documentation. If the documentation is unavailable, the jumpers/dipswitches can sometimes be found along the edge of the motherboard, next to the CMOS battery, or near the processor. Some manufacturers may label the jumper / dipswitch CLEAR - CLEAR CMOS - CLR - CLRPWD - PASSWD - PASSWORD - PWD. On laptop computers, the dipswitches are usually found under the keyboard or within a compartment at the bottom of the laptop.
Please remember to unplug your PC and use a grounding strip before reaching into your PC and touching the motherboard. Once you locate and rest the jumper switches, turn the computer on and check if the password has been cleared. If it has, turn the computer off and return the jumpers or dipswitches to its original position.
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Removing the CMOS Battery
The CMOS settings on most systems are buffered by a small battery that is attached to the motherboard. (It looks like a small watch battery). If you unplug the PC and remove the battery for 10-15 minutes, the CMOS may reset itself and the password should be blank. (Along with any other machine specific settings, so be sure you are familiar with manually reconfiguring the BIOS settings before you do this.) Some manufacturers backup the power to the CMOS chipset by using a capacitor, so if your first attempt fails, leave the battery out (with the system unplugged) for at least 24 hours. Some batteries are actually soldered onto the motherboard making this task more difficult. Unsoldering the battery incorrectly may damage your motherboard and other components, so please don't attempt this if you are inexperienced. Another option may be to remove the CMOS chip from the motherboard for a period of time.
Note: Removing the battery to reset the CMOS will not work for all PC's, and almost all of the newer laptops store their BIOS passwords in a manner which does not require continuous power, so removing the CMOS battery may not work at all. IBM Thinkpad laptops lock the hard drive as well as the BIOS when the supervisor password is set. If you reset the BIOS password, but cannot reset the hard drive password, you may not be able to access the drive and it will remain locked, even if you place it in a new laptop. IBM Thinkpads have special jumper switches on the motherboard, and these should be used to reset the system.
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Overloading the KeyBoard Buffer
On some older computer systems, you can force the CMOS to enter its setup screen on boot by overloading the keyboard buffer. This can be done by booting with the keyboard or mouse unattached to the systems, or on some systems by hitting the ESC key over 100 times in rapid succession.
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Jumping the Solder Beads on the CMOS
It is also possible to reset the CMOS by connecting or "jumping" specific solder beads on the chipset. There are too many chipsets to do a breakdown of which points to jump on individual chipsets, and the location of these solder beads can vary by manufacturer, so please check your computer and motherboard documentation for details. This technique is not recommended for the inexperienced and should be only be used as a "last ditch" effort.
How to turn your USB into password recovering tool
Hello ppl this is a simple PDF that has a tutorial on how to turn your USB drive into a password recovering hacking weapon. I have just set it up by myself, and it works perfectly.So Enjoy !!*_*
(For Education Purpose Only)
Sunday, August 23, 2009
What is the meaning of Trojans
Introduction to Trojans for Newbees
Written by Voxelite
I was thinking about trojans on the other day, I realized that most people do not know how they work, or even how to use them. So I decided to make this quick intro.
Trojans work by using a client-server structure. This structure has two components, yes, you guessed it, they're called the client and the server. the client is usually the one that works as a control panel for your victims. The server is the little .exe file that you try to get people to download and execute. Back in the day, trojans were pretty simple. Someone downloaded the server, and you connected to their computer via the client. Then you messed around, keylogged them, made them into a proxy, etc. This method worked because back then, most people did not have routers, and did not have firewalls. These days, practically everyone has both. This really upset the trojan people, because routers can screw up communication between the client and server, and firewalls will reject any incoming connections. Because of this, you couldn't connect to your victims! All hope was lost, or so it seemed...
One day, some bright programmer came up with the idea of having the victim connect to you! This solved all of the problems (except hte routers, which I'll get to in a second), and made it easier to see how many people you had infected. This method has a name. It's called reverse-connect. Reverse connect makes your computer act like a hub, and all the victims send a connection out from their computers, and to yours. You can't just automatically get a trojan and start going though. That's because of hte routers, and how networks and IP's usually work these days. Routers often have a firewall inside them, and will also turn away any incoming connections. That's why you have to open a port on the router, to let the connection through. But it doesn't end there. You also have to have a static LAN IP. These days, LAN's work via DHCP. DHCP makes it so there's a pool of LAN IP addresses, and whenever your computer comes on, it just grabs a random address and starts going. This is a problem, because you may shut down, and then the previously working connection has no idea where to go! It gets lost, and your hard-earned victims are lost too. Therefore, you have to configure your router so that it reserves one LAN IP address just for you, whether your computer is off or on. This is called a static IP, btw. But we're not done yet, because the same dynamic IP problem applies to your WAN IP! It changes sometimes monthly, weekly, or even daily! Then your bots would be truly lost... But there is a way to fix this! It's called No-IP. No-IP is a type of service (almost always free, and there's many providers) that lets you register a domain name that you tell victims to connect to when you build the server. the victims connect to the domain name, and No-IP forwards that connection to your current WAN IP. You use software that comes with the No-IP account to constantly update your WAN IP. So everything works fine.
There are a few problems with trojans though. First of all, you're hosting the victims off your own computer and your own connection, which can get you easily screwed, and second of all, most No-IP type services have caught onto this practice, and disable your account the moment they see trojan-like connections. I used to use trojans a long time ago, and back then we were always on the hunt for No-IP sites that didn't disable your account. I looked into some of my old files, and found two sites that are worth mentioning:
Written by Voxelite
I was thinking about trojans on the other day, I realized that most people do not know how they work, or even how to use them. So I decided to make this quick intro.
Trojans work by using a client-server structure. This structure has two components, yes, you guessed it, they're called the client and the server. the client is usually the one that works as a control panel for your victims. The server is the little .exe file that you try to get people to download and execute. Back in the day, trojans were pretty simple. Someone downloaded the server, and you connected to their computer via the client. Then you messed around, keylogged them, made them into a proxy, etc. This method worked because back then, most people did not have routers, and did not have firewalls. These days, practically everyone has both. This really upset the trojan people, because routers can screw up communication between the client and server, and firewalls will reject any incoming connections. Because of this, you couldn't connect to your victims! All hope was lost, or so it seemed...
One day, some bright programmer came up with the idea of having the victim connect to you! This solved all of the problems (except hte routers, which I'll get to in a second), and made it easier to see how many people you had infected. This method has a name. It's called reverse-connect. Reverse connect makes your computer act like a hub, and all the victims send a connection out from their computers, and to yours. You can't just automatically get a trojan and start going though. That's because of hte routers, and how networks and IP's usually work these days. Routers often have a firewall inside them, and will also turn away any incoming connections. That's why you have to open a port on the router, to let the connection through. But it doesn't end there. You also have to have a static LAN IP. These days, LAN's work via DHCP. DHCP makes it so there's a pool of LAN IP addresses, and whenever your computer comes on, it just grabs a random address and starts going. This is a problem, because you may shut down, and then the previously working connection has no idea where to go! It gets lost, and your hard-earned victims are lost too. Therefore, you have to configure your router so that it reserves one LAN IP address just for you, whether your computer is off or on. This is called a static IP, btw. But we're not done yet, because the same dynamic IP problem applies to your WAN IP! It changes sometimes monthly, weekly, or even daily! Then your bots would be truly lost... But there is a way to fix this! It's called No-IP. No-IP is a type of service (almost always free, and there's many providers) that lets you register a domain name that you tell victims to connect to when you build the server. the victims connect to the domain name, and No-IP forwards that connection to your current WAN IP. You use software that comes with the No-IP account to constantly update your WAN IP. So everything works fine.
There are a few problems with trojans though. First of all, you're hosting the victims off your own computer and your own connection, which can get you easily screwed, and second of all, most No-IP type services have caught onto this practice, and disable your account the moment they see trojan-like connections. I used to use trojans a long time ago, and back then we were always on the hunt for No-IP sites that didn't disable your account. I looked into some of my old files, and found two sites that are worth mentioning:
Code: Select All
opendns.be
yi.org
How to find IP address from Yahoo Messenger chat
Sharp IP Getter is an application that has a purpose to find Internet Protocol of Yahoo Messenger through Instant Message Service. Whenever you chat with people in Yahoo Messenger Private Message or Instant Message, Sharp IP Getter will help you to find the real IP address of the current people or user that being chat with you. Sharp IP (Internet Protocol) Getter was developed and created by Www.Sharp-Soft.Net
How to find IP address from Yahoo Messenger chat? How to find ip address of a person in yahoo messenger? how to get ip in yahoo messenger? how to find ip address from instant message in yahoo messenger?. Those all questions might be ask from people who wanna know how to get ip address from yahoo messenger.
Actually there is a simple steps using command prompt windows to find ip address from chat in yahoo messenger, but this is not the good time We give you that such ways, to get ip of Y!M, because without that steps, with Sharp IP Getter you already knew how to look for the IP address of a user or people in yahoo messenger.
How to use Sharp IP Getter
Just run the software and instantly you will see a list of IP address in the software. That IP address should be the one / people who chat with you. If you are unable to see the IP, make sure you send a file or image aka photo to the target and the IP address of the target will rise at Sharp IP Getter.
Download Sharp IP Getter
How to bypass the Rapidshare time limit
Well well well the rapidshare time limit is a annoying thing. It is a little bitch I must admit. Here is a quick tutorial on how to bypass the limit.
1. Find your rapidshare file
2. Click "Free User"
3. Once you see Rapidshare Counter counting down, Go to your browser bar and enter
Code: Select All
javascript:alert(c=0)
4. Your done
Troubleshooting
1. Find your rapidshare file
2. Click "Free User"
3. Once you see Rapidshare Counter counting down, Go to your browser bar and enter
Code: Select All
javascript:alert(c=0)
4. Your done
Troubleshooting
Q: Why do I keep getting "Javascript must be enabled"
A: Just refresh the page
so,just in case if your Internet provider gives you a static ip,that remain same all the time then what?
The answer is use Rapidshare Leeacher,it actually gives you the premium link of that file eg:-
Subscribe to:
Posts (Atom)
